How to Design a Varsity Letterman Jacket Patch
A practical guide to designing chenille varsity patches: sizing, letter shapes, colour pairing, placement on the jacket, and the mistakes that ruin a good design.
A letterman jacket patch is one of the few things people genuinely keep for decades. It is worth getting right, and the difference between a good one and an awkward one usually comes down to decisions made before anything is stitched.
Here is how to make those decisions well.
Where do patches go on a letterman jacket?
Most people design the patch first and then work out where it goes. Do it the other way round. The position dictates the size, and the size dictates what the design can contain.
The chest letter. The classic school letter goes on the left chest, usually over the heart. A single chenille letter around 5 to 6 inches tall is a common starting point, but check it against the actual jacket size and any school requirements.
The right chest. Often used for a name or a smaller emblem. Keep enough space around the zipper, snaps, and pocket so the decoration does not interfere with them.
The back patch. Room for a full team name, mascot, or a school crest. Typically 10 to 12 inches wide. This is where illustration belongs, if you want any.
The sleeve. Graduation year, jersey number, or a small award. Usually 3 to 4 inches. Sleeves curve, so keep these designs simple and compact.
The shoulder or upper back. Arched lettering — a team name curved above a central design. Looks sharp, but the arch has to be drawn properly rather than bent afterwards.
Award bars and pins. These are separate from sewn patches. Schools may put them on or around the earned varsity letter, and the arrangement can depend on the award program. Ask the school or jacket supplier before making holes or permanently attaching anything.
These are layout examples, not a universal placement rule. Lay the pieces on the jacket, photograph the front, back, and sleeves, and check the layout with the wearer or school before sewing.
What size should a varsity letter patch be?
For one large chest letter, 5 to 6 inches tall is a useful starting point. The right size depends on the jacket size, the width and shape of the letter, the felt border, and whether other details sit inside it. Measure the available area on the actual jacket before ordering.
Ask whether a quoted measurement covers only the chenille letter or the entire patch including its felt border. Those can be different dimensions. Request the finished outside dimensions on the proof, then hold a paper cutout of that size against the jacket.
Thick chenille yarn needs room for clear edges and open spaces inside letters. If a small design includes fine text or detail, ask whether embroidery would reproduce it more clearly. There is no single minimum that fits every design or supplier.
Letter shape matters more than font
Chenille letters are cut from felt and filled with yarn, which means thin strokes do not survive. A delicate script font that looks elegant on screen will come back as a wobbly, fragile shape with loops falling off the edges.
What works:
- Block letters. Heavy, square, generous stroke width. The classic varsity choice for good reason.
- Slab serifs. The thick rectangular feet give the letter a solid base.
- Simple collegiate faces. Wide, bold, minimal contrast between thick and thin.
What does not:
- Thin script or handwriting fonts
- Anything with hairline strokes
- Highly condensed faces — the counters (the holes in letters like P, A, O) close up
- Outline-only fonts, since there is nothing to fill
A useful test is to view the proof at its intended finished size and check that the letter remains readable, especially the openings in letters such as P, A, and O. Ask for a revised proof if those spaces look crowded.
Colour: three is the sweet spot
A traditional varsity patch uses three colours, and there is a reason that convention stuck.
- The base felt — the background the letter sits on
- The chenille yarn — the letter itself
- The border felt — the outline that separates the patch from the jacket
The classic arrangement is a dark base, a light letter, and a contrasting border. Navy base, cream letter, gold border. Black base, white letter, red border. The contrast is what makes the letter readable from across a room, which is the entire job of the thing.
Two colours is fine if you want something cleaner — just make sure the letter and base are far apart in tone, not two shades of similar brightness.
More than three starts to muddle. Chenille is a bold material. It does not reward subtlety.
One practical point: check your colour against the jacket, not against white. A cream border looks crisp on paper and disappears on a cream sleeve. Ask your supplier what the patch will sit on before finalising.
Mixing chenille with embroidery
This is the combination most people do not know is available, and it solves the biggest limitation of chenille.
Chenille cannot hold fine detail. Embroidery can. So the standard approach on a serious jacket is:
- Chenille for the big letter or number
- Embroidery for the team name, year, or any small text stitched across or beneath it
You get the thick tactile letter and readable detail. A chenille “P” with “PATRIOTS 2026” embroidered across the crossbar is a far better patch than either element alone.
If you want this, say so on your quote request and ask how the combined materials affect the price and proof.
Backing: sew it on
Chenille patches are heavy. They go on garments that get worn hard, sat in, thrown in bags, and washed.
Sew-on is the right answer, and it is the traditional one. A stitched border will outlast the jacket.
Iron-on backing is available, and it works — but on a large, heavy chenille patch the adhesive will eventually lift at the corners. If you want iron-on for convenience, iron it on to position it, then run stitches around the edge. Two minutes of work turns a temporary bond into a permanent one.
Velcro is worth considering if the jacket will be passed down, or if players change year to year — one loop panel on the chest, and the letter swaps out.
The five mistakes that ruin a good design
1. Designing too small. The most common by a distance. Chenille needs room.
2. Picking a font before checking the strokes. Beautiful on screen, unstitchable in yarn.
3. Insufficient contrast. A mid-grey letter on a navy base disappears at any distance.
4. Forgetting the jacket colour. The border has to separate the patch from the garment, and that only works if it contrasts with the garment too.
5. Approving the proof too quickly. This is the expensive one. Check the spelling. Check the year. Check it letter by letter, ideally with someone else looking too. Changes are free before production and impossible after.
A worked example
A high school needs 40 jackets kitted out:
- Chest: 6-inch chenille “W”, cream yarn on navy felt, gold border
- Back: 11-inch chenille “WARRIORS” arched, same colours
- Sleeve: 3.5-inch embroidered “2026” — embroidered rather than chenille because it is small and needs to be legible
- Backing: sew-on throughout
That combination is conventional, and conventional is correct here. A letterman jacket is not the place for design experiments — it is a piece people expect to look a specific way, and it should.
Before you order
- Position chosen for each patch
- Finished patch dimensions, including the border, checked against the jacket
- Letter and fine details checked on a proof at finished size
- Three colours picked, checked against the jacket
- Decided what should be embroidered rather than chenille
- Spelling and year checked by a second person
- Sew-on backing confirmed
Ready to design yours? Request a free quote — send a sketch, a photo of an old jacket, or just describe it. We will send back a digital proof showing exactly how it will look before anything is made, and revise it as many times as you need.
Learn more about custom chenille and varsity patches.